Tested and validated
Developed and tested daily on a real Zendure installation with several inverters (videos and live demo to prove it).
Zendure
Zendure and Home Assistant: drive all your SolarFlow and Hyper units together
Zendure is the brand TED is developed and tested on every day, on a real installation with several inverters. Several SolarFlow and Hyper units, with or without the Zendure app: they all work together.
Sounds familiar?
- You own several Zendure devices and want one consistent regulation.
- You want to add a battery from another brand next to your Zendure units.
- You want to keep the Zendure app while adding other inverters.
Why it is hard
Connecting Zendure to Home Assistant is done with the Zendure integration. But once the entities show up, you still have to decide and share power between the devices, taking their state into account.
The solution
The features involved
Autofill
Enter the device's label (or QIS): its Home Assistant entities are suggested automatically.
With or without the Zendure app
In assisted mode, the Zendure app keeps control of its devices and the others come in as reinforcement; in autonomous mode, everything is controlled.
Dedicated safeguards
Maximum charge level protection and detection of devices that do not apply their setpoint.
Getting it running
- 1
Install the Zendure integration in Home Assistant
Your devices and their entities must show up.
- 2
Install the software
Home Assistant OS app or Docker.
- 3
Add each Zendure unit
Label, Autofill, controlled or monitored type, test, then apply.
See it working before you install it
The live demo shows the real interface on a working installation: energy flows, inverters, batteries, settings.
Frequently asked questions
Which Zendure models?
The devices the Zendure Home Assistant integration can control, including SolarFlow and Hyper. The live demo shows a real installation.
Do I need a Zendure meter?
No: any meter available in Home Assistant works, or a Shelly read directly.
Other problems solved
Make several battery and inverter brands work together
Each manufacturer app ignores other brands. Here, they all work together under one setpoint.
Read the solutionMultiple batteries oscillating or passing energy back and forth
Each battery corrects the meter on its own and fights the other. One setpoint, computed for all of them, ends the ping-pong.
Read the solutionGo beyond the limits of your manufacturer's HEMS
One brand, few settings, a limited number of devices: go beyond these limits, with or without the original HEMS.
Read the solutionReady to make all your batteries work together?
Free download: your free license arrives as soon as your email address is confirmed, no credit card required.