Advanced settings can wait
The default values are fine for your first tests: adjust later, one setting at a time.
Getting started
The setup wizard guides you
When first opened, a wizard asks you a few questions. Here they are, so you can prepare your answers. Every step can be skipped and changed later in the settings. The interface is in French for now: menu names are given as they appear, with their meaning.
- 1
Open the interface
Home Assistant OS: TED entry in the sidebar. Synology or Docker:
http://MACHINE-ADDRESS:5002(or the port you chose). - 2
Your free license
First name and email: the license is obtained and activated automatically. Without a license, regulation stays on standby and controls nothing.
- 3
The Home Assistant connection
Home Assistant OS: automatic, nothing to enter. Synology or Docker: two pieces of information.
- The Home Assistant address, the one in your browser: for example
http://192.168.1.50:8123. - An access token: in Home Assistant, click your name at the bottom left › Security tab › at the bottom, Long-lived access tokens › Create token, name it “TED” and copy it.
Click Tester la connexion (test connection): a message confirms that Home Assistant answers.
- The Home Assistant address, the one in your browser: for example
- 4
Your meter
Pick the meter's power entity from the suggested list (or a Shelly by its IP address), then Tester la lecture (test reading). Tip: switch on a kettle, the value must go up.
- 5
Plan, modes and limits
Supplier and contract, Autonome or Assisté mode (when in doubt, keep both), contract power and battery levels.
- 6
Declare your inverters
Onduleurs (inverters) tab › add: pick the device entities (for Zendure, Autoremplissage finds them). Type piloté (controlled: it receives setpoints) or surveillé (monitored: read only). Regulation then starts.
Getting it right
Habits that avoid surprises
Start with one inverter
Check that it follows the setpoints, then add the others.
You stay in control
You are responsible for your electrical installation: keep cautious maximum powers.
Want to see an installation running before configuring yours?
The live demo shows the real interface, on an installation in service.